How to digitize an appliqué design using Sew Art

By on April 21st, 2020
This site contains affiliate links to products. We may receive a commission for purchases made through these links.
How to digitize an applique design using SewArt
free machine embroidery designs
.


Sew Art is a very inexpensive embroidery digitizing program, so it’s capabilities are sometimes underestimated. However, after downloading and playing with the software quite a bit, I’m pleasantly surprised by what I can accomplish with this inexpensive digitizing software.  Of course you can convert JPG images to embroidery files using some of its auto digitizing tools. But, did you realize that you can actually even digitize an appliqué design using Sew Art?

What makes appliqué designs different from regular machine embroidery designs?

Appliqué designs differ from regular embroidery designs because they are created to incorporate appliqué fabric.  Instead of the stitching filling in the shapes of the design, the appliqué fabric fills in the shape.  The design file is programmed to stop at certain points to accommodate the inclusion of the fabric.

Appliqué designs almost aways start by stitching out a placement line. The placement line is intended to show you where the appliqué fabric should be placed. You want to make sure that the appliqué fabric covers the placement line.

Placement stitching for machine applique design digitized using Sew Art

The next round of stitching is the tack down stitching. The intention is to hold the appliqué fabric in place so that you can trim the outside edge of the fabric, always using appliqué scissors.

Tack down stitching for appliqué that I digitized using Sew Art

The final round of stitching is the finished satin stitching around the outside edge. This stitching should cover the raw edge of the appliqué fabric.

final satin stitching of appliqué design created in Sew Art software

Not sure how to stitch out an appliqué design? Check out my post about how to appliqué with an embroidery machine. Already familiar with appliqué on your embroidery machine, but looking for some pointers? Check out my top 10 tips for machine appliqué.

Recommended Products

How to digitize an appliqué design using Sew Art

It’s one thing to stitch out an appliqué design on your embroidery machine. But what about creating one? Sew Art makes it super easy.

Of course you can make an appliqué file from any shape, but to keep it simple, I decided to make a simple circle appliqué using the built-in circle shape in Sew Art. Here’s how I did it.

Start with a blank canvas

When you start Sew Art, you will see a blank canvas.  Since we are going to build the file from one of Sew Art shapes, there is no need to open any other file.

Digitize an appliqué design using Sew Art: a blank canvas in Sew Art

Turn on the grid

From the View menu, I turned on the grid to be able to clearly see the size of the appliqué design I was creating.

Digitize an appliqué design using Sew Art: displaying the grid in Sew Art

Select one of the built-in shapes

From the shapes menu, I selected a circle and resized it to be about 3 inches in diameter.

Using the shape tool to draw a circle in Sew Art

Make the shape one solid color

By default the shapes in Sew Art have a stroke and a fill that are different colors. Because I wanted a solid circle, I used the paint bucket tool to apply the same purple color to the stroke and the fill so that the software would interpret the circle to be one solid color.

Change the shape to one color in Sew Art

Define the stitches

Now the circle is ready to use as a basis for an appliqué design. Click on the sewing machine icon to start creating some stitches.  In order to create the appliqué design, we first need to select the appropriate settings.

In the top bar, select “Appliqué (Border)” then make sure that in the drop down box, select “5 Satin” for the stitch type. Then you need to select the width and density of your stitches. The setting: Height, controls the width of the stitches.  I chose 30 for my stitch width which is 30 * .1 = 3mm. For the density, which is labeled “Length,” I chose 2. The lower the number for the length, the tighter the stitching will be.

You may notice that on the right hand side, the color stops are displayed. Even though it appears that there is only one round of stitching, Sew Art will actually create three. Because we have selected “Appliqué” as the stitch type, Sew Art will create three rounds of stitching as previously described: the placement stitching, the tack down stitching and the final satin stitching.

Save the image and the embroidery design

Choose File -> Save.

Saving an embroidery design in Sew Art

Sew Art will first prompt you to save the file as an image.  Since you are manipulating graphics from which you are basing your embroidery, you may want to save the modified image.

By default, Sew Art chooses the TIF format for your modified image to save. TIF is not a very compressed format, so I might choose JPG instead. Just give the file a different name than your original artwork if you want to preserve the original version.

Saving an embroidery design in Sew Art - next save embroidery design

Now save your embroidery file.   You will notice that there is an option to check “Join Adjacent Same-Colored Threads” which is checked.  I was concerned about leaving this checked because I thought it might remove the stops between the placement, tack down and final satin stitching, but it turns out it doesn’t affect the creation of these three stops. So you can just leave it checked when you save your embroidery file.

Not sure what format to choose for your embroidery file? Check out my recent post on determining and converting embroidery file formats.

Saving an embroidery design in Sew Art - first save image

Test out your new appliqué design

In order to test out your design, you will need to load it onto your embroidery machine. Not sure how to do that? Check out my recent post on loading embroidery files onto your embroidery machine.

You should always test out your embroidery and appliqué designs on some scrap fabric before stitching them on your finished product.  Before I wrote this post, I wanted to check the quality of the appliqué design that I created. So I stitched it out on my embroidery machine, and I was happy with the results.

My personal preference is to trim the fabric after I have just a single line of stitching done as opposed to after the zig zag tack down stitching. So, I simply repeat the first round of stitching (the placement stitching) after I lay down my appliqué fabric.  I trim my fabric using my appliqué scissors after that stitching is done, then continue on with the official tack down stitching and the final satin stitching.

Ready to try?

AS you can see, it’s not difficult to digitize an appliqué design in Sew Art. Give it a try yourself! S & S Computing, the company that makes Sew Art, offers a free 30 day trial of the software where you can actually create and stitch out embroidery and appliqué designs.

Want more lessons in Sew Art? Please let me me know!  I’m building a hands on course in Sew Art and I would love to have some beta testers.

Where to buy Sew Art

You can obviously buy the software on S&S Computing site . However, you can also purchase it through a 3rd party retailer that are listed on the S&S Computing site, some of whom throw in a free design or other bonus material.  For example, AK Designs offers a free embroidery design with the purchase of the Sew Art if you purchase the software through themAK Designs is also a popular reseller for SewArt.

Helpful Shopping Links

Want to remember this? Save “How to digitize an appliqué design using Sew Art” on your favorite Pinterest Board

How to digitize an applique design using SewArt

Leave a Reply

Your email address will not be published. Required fields are marked *